Hy-Force PCR (Pile Cutter)

Hy-Force PCR (Pile Cutter)

The HY-FORCE PCR range of hydraulic pile cutters which are manufactured in the UK, provides civil engineering contractors in the construction industry with a new attachment for removing excess precast piles and allows the operator to trim the pile down to the correct level.

The HY-FORCE PCR range of hydraulic pile breakers provide civil engineering contractors a unique machine capable off controlling the pile cutting process in turn the customer can benefit from the machines features which include:

  • Piles can be reduced faster due to the new design that uses a new profile of cutting tooth that removes the concrete from the rebar.
  • The machine can also process the pile not just cut it, by taking the cutting process and further crushing the wasted material turning the concrete into a material that is reusable on the site this removes the need to send the pile concrete off cuts to be crushed or sent to land fill as they are now recycled as the cutting is taking place.
  • The machine uses a special hydraulic control system that increases the power of the machine and controls the cutting heads so they are all fully synchronised this enables the machine to crush the pile accurately.
  • The design of the machines allows it to work in tight places were piles are grouped together.
  • The design allows the cutting teeth to be changed on site quickly if they need changed.
  • All wear parts are made from special alloys that increase the life span of the cutting teeth.

Download the Hy-Force PCR Specification Sheet

Our Range

The HY-FORCE PCR range of hydraulic pile cutters include two sizes of machines suitable for excavators the sizes in the range include:

HY-FORCE PCR 450

PCR-450 pile breaker is used for breaking down the piles leaving the rebar exposed on both diameter piles and square precast piles. Easy to use and set up on site the PCR-450 runs from the excavator’s hydraulics and has been designed to handle the pressures generated by the excavator’s hydraulic system (350 bar) and use it to its full extent.

The new design of the PCR-450 delivers the power at the cutting points evenly with advanced flow control delivering power and cutting accuracy when and where it’s needed most.

The PCR-450 rugged construction is suited to the harsh environment it will be used in.
The PCR-450 will provide many years of service. Below is a list of the machine’s key features:
• Cutting power and accuracy with all 4 blades pressing the same force on each cutting point.
• Light weight design using high strength materials reducing weight
• Replaceable cutting teeth which are easy to change if needed.
• Range of piles which can be processed 300-450 mm diameter and 300 to 400 square smaller piles if required
• Can work in confined spaces and where piles are closely grouped.

HY-FORCE PCR 650

PCR-650 pile breaker is used for breaking down the piles leaving the rebar exposed on both diameter piles and square precast piles. Easy to use and set up on site the PCR-650 runs from the excavator’s hydraulics and has been designed to handle the pressures generated by the excavator’s hydraulic system (350 bar) and use it to its full extent.
The new design of the PCR-650 delivers the power at the cutting points evenly with advanced flow control delivering power and cutting accuracy when and where it’s needed most.

The PCR-650 rugged construction is suited to the harsh environment it will be used in.
The PCR-650 will provide many years of service. Below is a list of the machine’s key features:
• Cutting power and accuracy with all 4 blades pressing the same force on each cutting point.
• Light weight design using high strength materials reducing weight
• Replaceable cutting teeth which are easy to change if needed.
• Range of piles which can be processed 300-650 mm diameter and 300 to 500 square smaller piles if required
• Can work in confined spaces and where piles are closely grouped.